step7故障诊断代码手册.docx
- haerqige个人认证 |
- 2021-09-20 发布|
- 82.05 KB|
- 39页
STEP 7 Error CodesVersion 01/2014
STEP 7 Error Codes
Version 01/2014
Page
Page PAGE 10 / 39
Error number:
Text:
Cause:
Remedy:
1:2063
TBI error 2063 Error during the function chdir
TBI can occur with the call AUTgetlinkedObjects. There should be an
AUT API tracer in the meantime.
7:6160
CPUs can only be connected via K bus or MPI bus
(line 1)
Split the desired path of the global data into several circuits. Make sure that
you only use on bus per circuit.
11:103
Cannot read CPU information on module, such as rated type, actual type and status of the module. Module might not be configured.
Check the logical address of the module. Check the slot and the configured slot.
13:31
The online connection from the PG to the module (SDB addressee) could not be set up. Connection hardware is faulty (e.g