年产万吨丁苯橡胶的工艺设计.docx
- 189****5087企业认证 |
- 2021-09-20 发布|
- 157.34 KB|
- 52页
最新 精品 Word 欢迎下载 可修改
年 月 日
年 月 日
工学学士学位毕业设计
课题名称: 年产4万吨丁苯橡胶生产工艺设计
2022年 06月 01日
河北工程大学毕业设计
PAGE 27
河北工程大学毕业设计
摘 要
本设计是以丁二烯和苯乙烯为原料,年产4万吨丁苯橡胶的工艺设计。通过比较目前丁苯橡胶的聚合生产方法,最后确定以低温乳液聚合法作为聚合的工艺生产方法。在设计过程中,根据设计任务书的要求,进行了较为详细的物料恒算和能量恒算,对设备进行了工艺计算和选型,同时对聚丁苯橡胶生产过程中的安全注意事项及“三废”治理作了相关说明。综合上述工艺计算和设计结果,绘制出了工艺流程图、主要设备图以及厂区布置图。
关键词: 丁苯橡胶 乳液聚合 工艺设计 丁二烯 苯乙烯
Abstract
The design is based on butadiene and styrene as raw materials, with an annual output of 40000tons of SBR process design. By comparing with the present SBR polymerization production method, we make a decision to treat emulsion polymerization at low temperature as polymerization production method at last. In the design process, in accordance with the requirements of the mission design, a more detailed material balance and energy balance, equipment for t